Search results

Traditional laboratory measurements of soil water diffusivity (D) and soil water retention curve (SWRC) are always time-consuming and labor-intensive. Therefore, this paper aims to present a simple and robust test method for determining D and SWRC without reducing accuracy.

In this study, a D model of unsaturated soil was established based on Gardner–Russo model and then a combination of Gardner–Russo model with one-dimensional horizontal absorption method to obtain n and a parameters of Gardner–Russo model. One-dimensional horizontal absorption experiments on loam, silt loam and sandy clay loam were conducted to obtain the relationships between measured infiltration rate and cumulative infiltration with wetting front distance. Based on the obtained relationships, the measured infiltration data from the one-dimensional horizontal absorption tests were used to calculate n and a parameters and further constructing D and SWRC.

Both the calculated D and SWRC inversed from the infiltration data were in good agreement with the measured ones that obtained from the traditional horizontal absorption method and the centrifuge method, respectively. Error analysis indicated that only the infiltration data are enough to reliably synchronously determine D and SWRC.

A simple and robust method is proposed for synchronous determination of soil water diffusivity and water retention curve.

Hugh Africa, Council on Higher Education (South Africa)

Accurate prediction of seasonal power consumption trends with impact disturbances provides a scientific basis for the flexible balance of the long timescale power system. Consequently, it fosters reasonable scheduling plans, ensuring the safety of the system and improving the economic dispatching efficiency of the power system.

First, a new seasonal grey buffer operator in the longitudinal and transverse dimensional perspectives is designed. Then, a new seasonal grey modeling approach that integrates the new operator, full real domain fractional order accumulation generation technique, grey prediction modeling tool and fruit fly optimization algorithm is proposed. Moreover, the rationality, scientificity and superiority of the new approach are verified by designing 24 seasonal electricity consumption forecasting approaches, incorporating case study and amalgamating qualitative and quantitative research.

Compared with other comparative models, the new approach has superior mean absolute percentage error and mean absolute error. Furthermore, the research results show that the new method provides a scientific and effective mathematical method for solving the seasonal trend power consumption forecasting modeling with impact disturbance.

Considering the development trend of longitudinal and transverse dimensions of seasonal data with impact disturbance and the differences in each stage, a new grey buffer operator is constructed, and a new seasonal grey modeling approach with multi-method fusion is proposed to solve the seasonal power consumption forecasting problem.

The highlights of the paper are as follows:

1. A new seasonal grey buffer operator is constructed.

2. The impact of shock perturbations on seasonal data trends is effectively mitigated.

3. A novel seasonal grey forecasting approach with multi-method fusion is proposed.

4. Seasonal electricity consumption is successfully predicted by the novel approach.

5. The way to adjust China's power system flexibility in the future is analyzed.

A new seasonal grey buffer operator is constructed.

The impact of shock perturbations on seasonal data trends is effectively mitigated.

A novel seasonal grey forecasting approach with multi-method fusion is proposed.

Seasonal electricity consumption is successfully predicted by the novel approach.

The way to adjust China's power system flexibility in the future is analyzed.

Because of increasing wealth inequality, China has been confronted with resentment against the rich (referred to hereafter as RAR or Choufu in Chinese), which is a growing concern owing to its potential to foment social conflict. Drawing on social comparison and deonance theories, this paper aims to provide theoretical insights into RAR within the Chinese context and to develop an RAR scale. Following spillover theory, the attitudinal and behavioral outcomes of RAR in organizational settings will be explored.

This research consists of two studies. Study 1 conceptualizes RAR and develops an RAR scale by using three separate samples. Exploratory and confirmatory factor analyses are conducted to establish scale reliability and validity. Study 2 uses hierarchical linear regression analysis to test whether employees’ RAR attitude spills over from the societal to the organizational setting.

Results suggest that RAR can be conceptualized as two distinct but related dimensions – emotional RAR and moral RAR. These two forms spill over to the workplace, influencing employees’ work attitudes and behaviors. Emotional RAR relates negatively to life satisfaction and prosocial organizational behaviors and positively to unethical organizational behaviors. Moral RAR relates negatively to pay satisfaction and positively to prosocial behaviors.

This research suggests that RAR has spillover effects from societal to organizational settings and demonstrates that a more robust understanding of employees’ workplace experience requires acknowledging social experiences, such as conflicts beyond the workplace.

This research contributes to the conflict management literature by exploring RAR as a negative attitude that serves to potentially ignite social conflict. It not only develops a theory-grounded, conceptual RAR model and a reliable RAR scale but also for the first time explores RAR attitudinal and behavioral outcomes beyond the social domain. This study serves as a meaningful touchstone for future research to incorporate social attitudes into organizational behavior research.

The purpose of this study is to prepare ZnFe₂O₄ nanospheres, sheet MoS₂ and three ZnFe₂O₄@MoS₂ core-shell composites with various shell thicknesses, and add them to the base oil for friction and wear tests to simulate the wear conditions of hybrid bearings.

Through the characterization and analysis of the morphology of wear scars and the elemental composition of friction films, the tribological behavior and wear mechanism of sample materials as lubricant additives were investigated and the effects of shell thickness and sample concentration on the tribological properties of core–shell composite lubricant additives were discussed.

The findings demonstrate that each of the five sample materials can, to varying degrees, enhance the lubricating qualities of the base oil and that the core–shell nanocomposite sample lubricant additive has superior lubricating properties to those of ZnFe₂O₄ and MoS₂ alone, among them ZnFe₂O₄@MoS₂-2 core–shell composites with moderate shell thickness performed most ideally. In addition, the optimal concentration of the ZnFe₂O₄@MoS₂ lubricant additive was 0.5 Wt.%, and a concentration that was too high led to particle deposition and affected the friction effect.

In this work, ZnFe₂O₄@MoS₂ core–shell composites were synthesized for the first time using ZnFe₂O₄ as the carrier and the lubrication mechanism of core–shell composites and single materials were compared and studied, which illustrated the advantages of core–shell composite lubricant additives. At the same time, the influence of different shell thicknesses on the lubricant additives of core–shell composites was studied.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2022-0367/

This paper aims to overcome the problem that the single structure of the driving term of the grey prediction model is not adapted to the complexity and diversity of the actual modeling objects, which leads to poor modeling results.

Firstly, the nonlinear law between the raw data and time point is fully mined by expanding the nonlinear term and the range of order. Secondly, through the synchronous optimization of model structure and parameter, the dynamic adjustment of the model with the change of the modeled object is realized. Finally, the objective optimization of nonlinear driving term and cumulative order of the model is realized by particle swarm optimization PSO algorithm.

The model can achieve strong compatibility with multiple existing models through parameter transformation. The synchronous optimization of model structure and parameter has a significant improvement over the single optimization method. The new model has a wide range of applications and strong modeling capabilities.

A novel grey prediction model with structure variability and optimizing parameter synchronization is proposed.

The highlights of the paper are as follows:

1. A new grey prediction model with a unified nonlinear structure is proposed.

2. The new model can be fully compatible with multiple traditional grey models.

3. The new model solves the defect of poor adaptability of the traditional grey models.

4. The parameters of the new model are optimized by PSO algorithm.

5. Cases verify that the new model outperforms other models significantly.

A new grey prediction model with a unified nonlinear structure is proposed.

The new model can be fully compatible with multiple traditional grey models.

The new model solves the defect of poor adaptability of the traditional grey models.

The parameters of the new model are optimized by PSO algorithm.

Cases verify that the new model outperforms other models significantly.

Legislation plays an essential role in addressing climate change in China. However, many barriers to formulating national legislation to address climate change have so far prevented its enactment. The bottom-up approach adopted in the international climate regime sets a good example. Accordingly, the purpose of this paper is to discuss the regional legislation to address climate change in China through exploring the following two questions: whether it is necessary to enact climate change legislation at regional level first and whether it is feasible to develop such regional legislation in the absence of national climate change law.

This paper analyses the necessity and feasibility of regional legislation to address climate change. Section 2 introduces the current legislative framework on climate change in China. Section 3 investigates whether it is better to push the legislative agenda at regional, rather than national level. Section 4 analyses the feasibility of establishing regional legislative systems. Section 5 explores the key issues in formulating and promoting regional legislation.

This paper concludes that it is necessary and feasible to pilot regional legislation before enacting national legislation. Under these circumstances, local governments can take the initiative to begin formulating regional legislation.

Addressing climate change needs immediate action and effective measures. It is, thus, necessary to reconsider the approach that China should adopt when developing legislation on climate change. This paper contributes to broadening current knowledge of regional climate change legislation in China.

The purpose of this article is to prepare graphene/polyimide composite materials for use as bearing cage materials, improving the friction and wear performance of bearing cages.

The oil absorption and discharge tests were conducted to evaluate the oil content properties of the materials, while the mechanical properties were analyzed through cross-sectional morphology examination. Investigation into the tribological behavior and wear mechanisms encompassed characterization and analysis of wear trace morphology in PPI-based materials. Consequently, the influence of varied graphene nanoplatelets (GN) concentrations on the oil content, mechanical and tribological properties of PPI-based materials was elucidated.

The composites exhibit excellent oil-containing properties due to the increased porosity of PPI-GN composites. The robust formation of covalent bonds between GN and PPI amplifies the adhesive potency of the PPI-GN composites, thereby inducing a substantial enhancement in impact strength. Notably, the PPI-GN composites showed enhanced lubrication properties compared to PPI, which was particularly evident at a GN content of 0.5 Wt.%, as evidenced by the minimization of the average coefficient of friction and the width of the abrasion marks.

This paper includes implications for elucidating the wear mechanism of the polyimide composites under frictional wear conditions and then to guide the optimization of oil content and tribological properties of polyimide bearing cage materials.

In this paper, homogeneously dispersed PPI-GN composites were effectively synthesized by introducing GN into a polyimide matrix through in situ polymerization, and the lubrication mechanism of the PPI composites was compared with that of the PPI-GN composites to illustrate the composites’ superiority.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2023-0415

Forming ties with prominent partners can help convey greater status and legitimacy to the company (Hallen, 2008) and also increases the entrepreneur’s influence within their own network (Bonacich, 1987). This allows entrepreneurs to gain greater access to the information, experience or resources that the company needs.

The founders of the company provided us with access to the inner workings of the company, their mentors and advisors and themselves. The authors used archival research and interviews when preparing this case. Interviews allow for the development of uncensored, real-life insights into the entrepreneur’s business experience. The authors also interviewed two of their mentors and investors.

Having graduated from UMass Lowell with engineering degrees, co-founders Rajia Abdelaziz and Ray Hamilton build invisaWear into a venture, but they did not know much about business. With coaching from their mentors, Rajia and Ray focused on building their network to raise capital to finance the business. Despite all their hard work networking, however, they faced a hurdle. Rajia and Ray contemplated their dilemma. “Are the authors doing something wrong? What can the authors do differently to attract investors?”

This case is suitable for an undergraduate course in business or entrepreneurship. This case is intended to illustrate to both business and non-business students how entrepreneurs can go about building their networks to grow their businesses. Presented as a real-life example of how entrepreneurs build their networks, the case can also be used to hone in on select topics including mentoring, searching for resources and coachability.

The relationship between farm size and greenhouse gas (GHG) emissions has not been clearly defined. This paper aims to assess and compare the impact of farm size on greenhouse gas (GHG) emissions derived from wheat and maize production in the North China Plain (NCP), one of the most important agricultural regions in China.

A field survey through face-to-face interviews was conducted to collect the primary data, and life cycle assessment method, a worldwide comparable framework, was then adopted to characterize the farm-size effect on greenhouse gas (GHG) wheat and maize production in NCP.

It was confirmed that GHG emissions from N fertilizer production and use were the primary contributor to total carbon footprint (CF). As farm size increased, maize yield increased but wheat yield barely changed, while area-scaled and yield-scaled CF declined for both crops. These results were supposed to relate to utilize the inputs more efficiently resulting from increased application of modern agriculture methods on larger operations. It was also found maize not only had higher grain yields, but possessed much smaller CFs. More notably, the reduction of CF with farm size seemed to be more sensitive for maize as compared to wheat. To further mitigate GHG emissions, farm size should better be larger for wheat than for maize.

This study provides useful information guide for Chinese agriculture in increasing crop production, raising farm income and relieving environmental burdens caused by the misuse of agricultural resources.